WHATMAN POLYCAP AS囊式濾器的詳細介紹WHATMAN POLYCAP AS囊式濾器6705-3602 6705-3604 6705-36106708-3602 6708-3604 6709-3602Polycap? AS (Aqueous Solution) is a unique product recommended for filteringaqueous solutions. It combines a glass microfiber (GMF) prefilter and a nylonmembrane, prolonging the life of the filter and allowing larger volumes anddifficult samples to be filtered easily.Features and benefits First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45 and 1.0 μm) life and higher filtration efficiency Nylon membrane layer is inherently hydrophilic, has low extractables, is biosafe and has excellent flow rates Ultra-clean containing no surfactant or mold release agents Housing thermally fused (no glues, adhesives or extraneous materials) Integrity-testable by bubble point, pressure decay or forward flow methods Provides highly effective filtration area in a small size Autoclavable; some presterilized with gamma irradiation Manufactured in clean room facilities under ISO Quality Systems
Applications Admixtures Biologicals Buffers Cleaning/rinsing solutions Enzymes Extemporaneous solutions Immunologicals Irrigation solutions Nutrients Ophthalmic solutions Pharmaceutical solutions Reagent preparation Salt solutions Therapy solutions Tissue culture media Viral suspensions Technical Properties - Polycap AS HousingPolypropylene VentOn inlet PrefilterGlass microfiber double laminated with polyolefin monofilament non-woven MembraneNylon Support systemPolypropylene SealingHeat-fused Maximum pressure4.1 bar (60 psi) Endotoxin levelL LAL tested, ≤ 0.5 EU/ml BiosafetyMaterials pass USP Class VI SterilizationCertain filter devices have been sterilized. * Capsules may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable (*sterile and nonsterile options offered) Filtration area36 mm capsule: 400 cm2 (62 in2) 75 mm capsule: 820 cm2 (127 in2) 150 mm capsule: 1650 cm2 (256 in2) IPA bubble point 0.2 μm membrane: > 1.1 bar (16 psi) 0.45 μm membrane: > 0.69 bar (10 psi) 1.0 μm membrane: > 0.14 bar (3 psi) SSB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing 1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing MNPT - Male national pipe thread FNPT - Female national pipe thread HB - Hose barb
Ordering Information - Polycap AS Catalog NumberDescription 6708-3602Polycap AS 36, sterile, 0.2 μm, with 1/2 SB inlet and outlet,1/pk 6705-3602Polycap AS 36, sterile, 0.2 μm, with SB inlet and outlet, 1/pk 6709-3602Polycap AS 36, sterile, 0.2 μm, with MNPT inlet and SB outlet, 1/pk 2606TPolycap AS 36, 0.2 μm, FNPT inlet and outlet, 5/pk 2606NSPolycap AS 36, 0.2 μm, with SB inlet and outlet, 5/pk 6708-3604Polycap AS 36, sterile, 0.45 μm, with 1/2 SB inlet and outlet, 1/pk 6705-3604Polycap AS 36, sterile, 0.45 μm, with SB inlet and outlet, 1/pk 2607NSPolycap AS 36, 0.45 μm, with SB inlet and outlet, 5/pk 6705-3610Polycap AS 36, sterile, 1.0 μm, with SB inlet and outlet, 1/pk 2608NSPolycap AS 36, 1.0 μm, with SB inlet and outlet, 5/pk 6706-3602Polycap AS 36, sterile, 0.2 μm, with SB inlet and outlet plus filling bell, 1/pk 6709-7502Polycap AS 75, sterile, 0.2 μm with MNPT inlet and SB outlet,1/pk 6708-7502Polycap AS 75, sterile, 0.2 μm with 1/2 SB inlet and outlet, 1/pk 6705-7502Polycap AS 75, sterile, 0.2 μm, with SB inlet and outlet, 1/pk 2706TPolycap AS 75, 0.2 μm, with FNPT inlet and outlet, 5/pk 6705-7504Polycap AS 75, sterile, 0.45 μm, with SB inlet and outlet, 1/pk 6708-7504Polycap AS 75, sterile, 0.45 μm, with 1/2 SB inlet and outlet, 1/pk 6709-7504Polycap AS 75, sterile, 0.2 μm, with MNPT inlet and SB outlet, 1/pk 2707NSPolycap AS 75, 0.45 μm, with SB inlet and outlet, 5/pk 6705-7510Polycap AS 75, sterile, 1.0 μm, with 1/2 SB inlet and outlet,1/pk 6706-7502Polycap AS 75, sterile, 0.2 μm, with SB inlet and outlet plus filling bell, 1/pk 2806TPolycap AS 150, 0.2 μm, with FNPT inlet and outlet 5/pk 2806Polycap AS 150, sterile, 0.2 μm, with 1/2 HB inlet and outlet, 5/pk 2805Polycap AS 150, sterile, 0.2 μm, with 1 11/2 sanitary inlet and outlet, 5/pk 2807Polycap AS 150, sterile, 0.45 μm, with 1/2 SB inlet and 1/2 HB outlet, 5/pk
GE Whatman濾紙濾膜產品一級代 理(一),其余目錄見下方
WHATMAN離心超濾管 WHATMAN提取套管圓筒濾紙萃取套管 whatman 微生物檢測系統 WHATMAN擦鏡紙 WHATMAN盤式濾器 WHATMAN囊式濾器 WHATMAN針頭濾器 whatman定性濾紙 whatman定量濾紙 whatman玻璃纖維濾紙GF/A GF/B GF/C GF/D GF/F whatman聚碳酸酯膜 whatman無機膜 whatman膜容器過濾器 whatman煙草檢測濾紙劍橋?yàn)V片 whatman PH試紙 DE-52纖維素 Whatman醋酸纖維素膜硝酸纖維素膜混酯膜再生纖維素膜
?
Bio-Rad伯樂官網 |伯樂授權代理 |伯樂ddPCR| 伯樂Aminex| 伯樂層析填料色譜柱是專業的授權總代理區域代理經銷平臺。
? 如需詢價，請加客服QQ：1749072012 、客服微信：jinshanbio，或發送郵件到1749072012@qq.com
? 平臺為生命科學研究相關領域提供一站式耗材試劑儀器解決方案和采購服務，數據資源基于CC協議。
? 本文地址：
http://m.yeybxjkgt.cn/thread-39421.htm
QQ:1749072012